Mamibot Mamibot EXVAC880 Wisor

What is the Mamibot Exvac 880?

With the Exvac 880 the company Mamibot launches a generation of robot vacuum cleaner with mop function, which is based on LDS navigation. The Exvac 880 scans the rooms in real time, calculates at the same time the most effective cleaning route and stores this information in the corresponding app.

How does the Mamibot Exvac 880 work?

The Mamibot Exvac 880 can either be used as a suction robot only, as a floor-wiping robot or as a 2-in-1 robot vacuum and mop. How, where and when the robot vacuum mop should clean, can be set individually in the app. Cleaning jobs for the robot vacuum cleaner with mop can be triggered either via app, conventional remote control or directly on the device. Voice control is also possible with Amazon Alexa, Google Home or Tianmao Genius.

What do I have to pay attention to when defining the cleaning zones?

The robot vacuum and mop will clean an area of approx. 100 m² with one battery charge. If the area is larger but there is not enough battery, the Mamibot Exvac 880 Wisor will automatically move into the charging station and continue its work after charging. A full charging endures around 3 to 4 hours and means working power for around 90 to 120 min.

It can easily overcome hurdles up to 1.8 cm and thus include several rooms but also carpets in the cleaning process.

Classification of dry, wet and no-go zones

In the cleaning app, several rooms can be combined as a single cleaning zone. Of course, large rooms (e.g. > 120 m²) can also be divided into several individual zones. Please note that depending on the desired cleaning mode (wet, dry or combined) no-go zones must be defined as well. After all, the expensive Persian carpet should not be cleaned wet.

What are the advantages of the Mamibot Exvac 880?

Cleaning in three different suction levels (max. 2,880 Pa) and different water supply are possible. This has the advantage that depending on the location (e.g. kitchen) a more effective cleaning is possible at the push of a button. The dust container (600 ml) and water tank (370 ml) are also larger than those of conventional cleaning robots.

Due to the generally lower noise level (depending on the suction power!) the Exvac 880 is perfectly suitable for cleaning when you stay in the room.

Thanks to OAT (over-the-air) updates, the robot vacuum cleaner with mop updates its software without having to drive into the charging station. The Exvac 880 Wisor can also be shared with family and friends thanks to the Multiple Operation Mode.

Included:

Mamibot EXVAC 880 Winsor

1 x Charging base
1 x Power cable
1 x Replacement HEPA filter
1 x Replacement sponge filter
2 x Side brushes
1 x Dust bin
1 x Water tank with dust bin
1 x Cloth
1 x Cleaning tool