Your robotics expert!
More than 290.000 satisfied customers
Complete installation robotic lawn mowers by our engineers

Worx Worx Landroid M700 2.0 (WR167E) 2021

€899,00 €849,00 Incl. tax
Article number:
Worx Landroid M700 2.0 (WR167E) 2021
Worx Landroid M700 2.0 (WR167E) 2021
Out of stock
Delivery time:
Delivery foreseen as from 11/10/2021

This model from Worx enables automatic maintenance of lawn areas up to a maximum of 700 m2. Using artificial intelligence, the robot mower works particularly quickly because it is capable of learning and adapts to the conditions in the garden. In this way

More than 290.000 satisfied customers
Complete installation robotic lawn mowers by our engineers

How does the new Worx M700 2.0 differ from the previous M700?
The special features of the new Worx models of this season are the support with Wi-Fi and now also via Bluetooth. The new blade disc design automatically raises the blades when the Worx Landroid 167E encounters an obstacle such as small stones or bumps. With its IPX5 waterproof body, it is easy to clean. According to the specifications of the manufacturer, it can now be cleaned with a garden hose. This allows dirt, grass and debris to be removed quickly.


How does the robot grass cutter operate?
When the boundary wire has been installed, the Worx Landroid M700 2.0 is able to take care of the lawn automatically. As the Worx M700 2.0 is pre-programmed at the factory, there is no more time to spend setting up the robot lawn mower correctly. The Worx Landroid WR167E cuts the grass a little shorter each time it is working (mulching principle). The clippings fall to the lawn and are a natural fertilizer and moisturizer for the lawn.


Thanks to artificial intelligence, the Worx M700 2.0 is able to get used to your lawn and constantly improve its performance. The robot mower also cuts the edges of the lawn cleanly and efficiently thanks to 'Cut-To-Edge' technology, so there will be no need to trim manually afterwards.The robot lawn mower finds its way through winding plots, while being individually programmable and adapting to the different areas in the garden. Accessory options such as an ACS module or off-limits allow further personalisation and adaptation to the needs of the garden.

Clean with water hose
As a new feature from Worx, the M700 2.0 model has been equipped with an IPX5 waterproof body. This means that the robot mower can now be cleaned with a garden hose. However, this makes it easier to remove dried lawn debris or other dirt.

Shareable power source (20V)
The Worx Landroid is equipped with a powerful 20V lithium-ion battery. With the PowerShare function, the battery of the Worx Landroid M700 2.0 robot grass cutter can also be shared with other products in the Worx family.

For medium areas with/without slope
A powerful battery ensures that the robot lawn mower has enough power to handle more complex gardens or properties with slopes of up to ±35%. Equipped with artificial intelligence (AIA technology), the Worx WR167E adapts optimally to the requirements in the garden.

Smart control by using your smartphone 
In addition to the LCD display on the robot itself, the robot lawn mower has an app control. This allows the programming, control and monitoring of the Worx WR167E to be carried out conveniently from your pocket. The "Worx Landroid" app is available as a free download.


iOS (App Store)
Android (Google Play)
A Wi-Fi connection automatically updates the firmware of the Worx Landroid M700 2.0 (WR167E). This means your Worx robot lawn mower is always "up to date".
Garden with max. 700 m2 seeks smart, intelligent robot lawn mower

Reliable, autonomous mowing
With the Worx M700 2.0, the use on simple or complex areas is irrelevant, because it handles the mowing work absolutely reliably. Thanks to the powerful lithium-ion battery, the robot mows slopes of up to ±35 % (20°). It also adapts individually to the prevailing lawn and weather conditions. This ensures a lush lawn carpet throughout the season.


To ensure a safe mowing process, the Worx Landroid M700 2.0 has a variety of different sensors. Tilt and lift sensors react immediately if the Worx WR167E is lifted or tilted. If this occurs, the blade disc stops directly. To prevent the robot lawn mower from being operated by unauthorised persons or kids, it can be protected with a personal PIN code. In case of unauthorised removal of the robot mower from the garden, it cannot be used without the personal PIN code (theft protection).


At the factory, the robot grass cutter is set to drive to its charging station when it rains. The built-in rain sensor can be deactivated at the owner's request so that the Worx M700 2.0 also mows in the rain.

A special brand feature: side charging contacts.
A particular feature of the Worx is the side charging contacts. The robot lawn mower always moves forwards into and out of the station. Its movement resembles a pit stop at a car race.This movement, i.e. that it always enters/exits forwards, cannot be changed. This offers a significant advantage, because the positioning of the charging station is much more flexible than with models that drive in and out of the station forwards and backwards.


How is the Worx Landroid M700 2.0 installed and operated?
Worx delivers its robot lawn mowers pre-installed. This saves you valuable time and also means that as soon as you have laid the boundary wire along the edge of the property, the robot mower can be used. The delivery includes all installation material such as boundary wire, ruler, cable hooks and much more. The Worx robot grass cutter can be conveniently operated via an app (Wi-Fi or Bluetooth) or via the control menu with LCD display on the robot itself.


Customize your Worx robot mower for your garden!
Depending on your garden and your needs, the Worx Landroid M700 2.0 WR167E can be equipped with further optionally available add-ons. The plug-in modules can be attached to the robot lawn mower in a few simple steps. This gives you a Worx robot that adapts perfectly to your needs and requirements.


Anti-Collision System (ACS)
The Worx Landroid WR167E uses ultrasonic sensors to detect obstacles. This allows it to avoid objects without colliding with them.


Voice Control
Thanks to this accessory, the Worx robot mower can be controlled by voice command through the integrated speakers.


GPS location
If your Worx M700 2.0 robot grass cutter is stolen from the garden, its whereabouts can be tracked thanks to 4G technology.


Off Limits
This option is a virtual boundary option. It is recommended for areas with many obstacles. With this additional option, the installation of the boundary wire is greatly simplified.


Content sales packaging:

  • Worx Landroid WR167E
  • Charging station
  • Fixing nails (8 pcs.)
  • Power supply
  • Boundary wire (150 m)
  • Pegs (210 pcs.)
  • Distance rule (2 pcs.)
  • Replacement blades plus screws (9 pcs.)
  • Hexagonal key
  • Manual

Not yet rated

0 stars based on 0 reviews

Add your review
Use commas to separate tags

Related products

Perimeter Wire (100 meters)
he blades for your lawnmower robot Worx Landroid. For a perfect lawn, it is recommended to change th
Anti Collision System (ACS)
Worx - Garage

Excellent service

Please contact our customer service for advice, guidance or modification of orders.

Right to cancel and warranty

You have total peace of mind and can enjoy getting to know your new electronic helper in your own time, in your own home and with absolutely no risk.

Payment methods

RoboCleaners offers various methods of payment.

Home delivery

Free delivery as of 300€.



was added to your shopping cart

Out of stock

The requested quantity for is not available